The New Link-Belt TCC-1100


Link-Belt will unveil their all-new 100 t TCC-1100 telescopic crawler crane at CONEXPO-CON/AGG in Las Vegas, Nevada. The TCC-1100 is third in a growing lineup of Link-Belt telescopic crawlers, cementing the company’s presence in the market. Its design focuses on robustness, simplicity and reliability for the general contractor or bare rental fleet owner.

The TCC-1100 will offer an impressive capacity chart at radius that rivals even lattice crawler cranes with a similar base rating. Its full power boom, fabricated from ultra-high-strength steel and formed in Link-Belt’s own facility, makes it fast and easy to operate. The main boom is 45,7 m long and incorporates Teflon wear pucks to eliminate boom grease.

Fly options include a 9,4–16,7 m, three-piece bi-fold lattice fly and a 3 m heavy-lift fly. The heavy-lift fly swings and pins into place and is integral to one of the on-board fly options. It has over 18,1 t of capacity and lift procedures for two-load-line picks. All flys offset to 2, 15, 30, and 45°.

Of course, being a Link-Belt, the TCC-1100 moves quick and easy on or off the job site. It takes only four truckloads to transport. The main load weighs under 40 823 kg and, on the trailer, is only 3,86 m tall and 3,2 m wide. All overflow loads weigh less than 20 185 kg. Once onsite, the crane can be started and the carbody outrigger jacks deployed via remote control. On its outriggers, the crane sits wider than the competition for a rock-stable self-assembly platform. Tapered axles allow the sideframes to install easily and the 22 680 kg of counterweight mount to the upper using Link-Belt’s proven and patented HSL lattice crane counterweight removal system.

For flexibility on even the tightest jobsites, the TCC-1100 can work at three different track gauges: 5,8 m fully extended, 4,4 m intermediate, and 3,7 m retracted. It has two travel speeds and can travel up to 2,7 km/h to spend less time traveling and more time lifting.

The Link-Belt TCC-1100 telescopic crawler is set to become any erection crew’s first choice out of the yard.

Powering the TCC-1100 is a Tier 4 Cummins QSL engine producing 320 hp and driving a variable displacement piston pump package. Simple and dependable pilot operated control valves distribute flow to all functions. Taking the flow are tried and tested Link-Belt hoist packages using piston motors and 22 mm rope. The winches have 9535 kg of line pull and a maximum line speed of 131,4 m/min.

With the TCC-1100 being an excellent general contractor crane or a solid addition to a rental fleet, its moneymaking possibilities are prodigious. It’s ideal for bridge and steel erection, foundation work, railroad, wind energy and power transmission. Smooth, powerful and easy to move, this crane will see work in tough environments as well as general lift duties. Given a telescopic crawler’s uncanny ability to perform where no other crane can, the potential for the TCC-1100 is unlimited.

Source: Consultants F. Drapeau
Éric Beauvais


Cet article est également publié en français

© InfraStructures - Tous droits réservés - All rights reserved