Highly Versatile Portable Bollards


Sentry Protection Products' newest product is a versatile portable bollard available for a wide variety of uses, indoors and out. Guard Post™ is 1219 mm tall, tapers from 125 x 125 mm, with a 355 mm diameter round base. Each side of the post has a 63 x 500 mm inset available to place reflective tape or other signage.

This water-tight hollow unit can be filled with ballast to increase stability or can be attached with fasteners into a floor, dock, or any other flat base. It can be staked to the ground if used away from pavement.

Sentry Guard Post's removable top is designed to work with plastic chain for traffic control. The top allows for chain to pass-through with a slot and a round opening for chain attachment options. The cap is easily removed to give access into the post. Ballast, such as sand or water, can be added through the top. When done, the cap can be removed, the ballast poured out, and Guard Post becomes lightweight for moving and storing.

Source : Sentry Protection Products


Cet article est également publié en français

© InfraStructures - Tous droits réservés - All rights reserved