International Rental Exhibition
show in Amsterdam
All the major players will be at the new International Rental Exhibition
(IRE) to be held at the RAI exhibition center in Amsterdam, the Netherlands
on 3-5 June this year.
The Haulotte Group looks forward to
giving its customers and partners a warm welcome on its stand at the IRE
Exhibition. Haulotte's new H28TJ+ telescopic platform will be on display
at the exhibition. The other major exhibit will be the HTL 40-17 telescopic
According to Haulotte, the performance of the new platform H28 TJ+ is
unmatched by anything currently in the market. Due to its unique characteristics,
this platform significantly increases in productivity in a wide range of
working environments: a 6 m telescopic jib, outreach of 23 m, capacity to
lift rapidly up to 350 kg, operator comfort (proportional movements, generational
control panel), outstanding mobility (oscillating axle, differential wheel
Stanley presents the new Cyclone Drop
Hammer breaker. The cyclone concrete breaker dramatically increases productivity
while reducing overall cost as well as the size of carrier neeeded for a
job. All your industrial tools needs can be answered with a Stanley hydraulic
tool. Stanley will be showing power units, hand held breakers, concrete
saws, chipping hammers, post drivers, water pumps, etc. They will also be
showing mounted breakers, compactors, and the above mentioned drop hammer.
The French designer and manufacturer
of aerial work platforms, ATN, will present its PIAF 1000R mast-style boom
This electric powered aerial work platform has been especially designed
for all interior work up to 10 m.
Once folded down is only just 1,98 m in height which allows the passage
through standard doors and is only 1,03 m wide which enables easy turning
and handling in restricted places. Its horizontal outreach of 3,46 m as
well as its rotating mast of 2 x 110° make things very easy for positioning.
With a maximum capacity of 200 kg for a total weight of 2980 kg, the PIAF
1000R is equipped with non-marking tires as standard. The work platform
is fitted with a low-pressure hydraulic joystick allowing reliability, excellent
ergonomics and an autonomy comparable to an electro-hydraulic model. The
PIAF 1000R meets European EN280 standards.
Since it was established in 1982, ANMOPYC,
Spanish Association of Equipment Manufacturers for the Construction and
Mining Industries, main purpose is the development and promotion of member
companies sales in foreign markets, along with the intensive search for
new markets and the protection of the members interests in front of third
ANMOPYC co-operates with the Spanish Ministry of Economic Affairs as
well with ICEX (Spanish Institute for Foreign Trade), being responsible
for preparing and carrying out the Promotional Plan of the Spanish industry
in foreign markets. ANMOPYC is also member of CECE, Committee of European
Equipment Manufacturers, along with the rest of European National Associations.
Pumpex is now extending its range of
Professional Dewatering Pumps, by adding two new models of lightweight,
solids handling Submersible Sludge Pumps, SP 10 and SP14.
The pumps have the same modular design principals as Pumpex larger sludge
pumps, Series SP.
They are designed for heavy duty applications at construction sites,
in tunnelling works, mines etc. were reliability and wear resistance is
Trimble offers a broad portfolio of
integrated construction positioning systems designed to improve productivity
of the construction contractor for each phase of the construction cycle
- designing, grading, site checking, building and asset management.
At IRE, Trimble will concentrate on construction lasers and the Trimble®
Construction Manager asset management solution.
Trimble Holdings GmbH
Alimak Hek offers safe and efficient
vertical access solutions to buy or rent to customers in the construction
and other industries. Regardless of whether customers choose Alimak Hek
as a rental or purchase partner, the company will back the customer up with
comprehensive after sales, service and other support.
The product lines, Alimak, Champion, and Hek, have become the world's
leading names in construction hoists, industrial lifts, mast climbing work
platforms, transport platforms and material hoists as well as underground
equipment for both temporary and permanent installations. It is the result
of the company's total commitment to meet and exceed the expectations of
each individual customer.
Alimak Hek will present the new HEK Modular System, the total rack and
pinion solution that offers customers a high level of flexibility with less
components. Alimak Hek will also present the Scando Construction hoist 450
and the high speed Scando 650. The all-new fully modular Scando 650 hoist
offers improved performance, durability and lifting capacity, with lower
energy consumption and reduced cost of ownership.
Manitou is presenting a new lifting
platform design: the MANIACCESS 150 TP telescopic platform.
Combining a high working capacity with small size and a wide working
area, it is unique in the market.
Equipped with a 2,3 m wide by 5,0 m long cage which can reach 6,3 m when
the extension is deployed, the MANIACCESS 150 TP can lift a load of 1000
kg to a height of 15 m.
With the telescopic arm deployed to half-height, the resulting working
area is over twice the total length of the platform, that is, 15 m, with
a working height of 8 m. Equipped with 2 front stabilizers, and an automatic
load calculation system, work can be carried out at any height in complete
MCS will be launching the French version
of its highly successful Customer Relationship Management Software Application.
Designed specifically for the rental industry, this intelligent software
is fully integrated within the core MCS rental application enabling it to
work seamlessly sharing customer and product information for continuity
and accuracy of data.
The software's ability to manage the entire marketing process eases the
pressure placed upon sales and marketing teams. Users can be assured that
with MCS-crm every promotion and campaign will be run successfully and can
be monitored to measure overall effectiveness.
Touchstone's Rental Solution based
on Microsoft Dynamics AX, provides a complete single system allowing all
financial, operational & customer information to be held and accessed
from one central source resulting in consistent data that is paramount to
accurately capture statistical information. This includes: · A totally
scalable rental solution with global capabilities · Diarised availability
tracking · Full integration to fixed assets · Rental Contract
Processing and Project Management · One Stop Order Processing.
Touchstone is the Number 1 UK partner for Microsoft Dynamics and has
customers including Speedy Hire, RMD Kwikform and Jarvis.
inspHire offers applications to suit
rental companies of all sizes from start-ups to multi-depot organizations.
The company will be demonstrating its leading rental management solutions
including its Customer Relationship Management (CRM) package which has been
created specifically for the rental industry, the Mobile Working technology
which provides clients access to real time information from GPRS enabled
hand held devices, and the inspHire WebPortal designed to give customers
up to the minute information, 24/7, about their own rental activities.
Aimit AS has developed Aimit Equipment
Management (Aimit EQM) for the Rental Industry. Based on Microsoft Dynamics
NAV is one of the leading business solutions in the mid-market with more
than 60 000 installations worldwide. The Rental Solution will be especially
attractive to industries which sell or rent construction machinery, construction
equipment, scaffolding and bulk items.
Aimit EQM exists in 10 languages, and has been sold in Norway, Denmark,
Australia, Italy, Iceland, Hungary, Lithuania, Estonia, Czech Republic,
South Africa, UK, Canada and U.S.
The new LoadSwift system helps your
people to work more efficiently, more safely, with less downtime, and in
an environmentally responsible manner. The LoadSwift loading system from
Xena Systems Ltd. can be a vital cog in your multi-storey build, load in/out
process. Freeing up valuable tower crane resources, the dedicated load in/out
system is greatly more efficient than scaffold hoists, mast climbers and
conventional scaffold platforms.
A typical system consists of a new design cantilever crane and set of
three, new lightweight rolling platforms. The system has "patent applied
for" status and is an evolution of the company's existing X12 crane
and patented rolling platforms. The new crane and platforms have been matched
and designed to work specifically together as a system.
Xena Systems Ltd.