What to Expect at bauma 2016...


ANMOPYC, the Spanish Manufacturers Association of Construction, Public Works and Mining Equipment, will be present at bauma 2016 along with 52 of its members.
ANMOPYC was founded in 1982 as the sole representative of construction sector in Spain. Its main aim is promoting exports of its members worldwide, to give them encouragement for manufacturing of safe machines and equipment and strengthen R&D activities in construction sector.
The accurate and professional work developped by ANMOPYC has contributed to the progressive increase not only of their members but also of the promotional activities. ANMOPYC currently represents about 100 companies from all over Spain. They entrust of the Association to the guidance of their promotion abroad.


Alsina Group will participate in the upcoming edition of bauma 2016. Visitors will see all its products, engineered systems and formwork solutions and all the information related to them as well.

With 65 years of experience creating value in the industry, Alsina Formwork Engineering has become one of the leading companies in the formwork world. Ongoing investment in R&D in recent years have been the key to important new technological developments helping to create better, safer, ergonomic and more productive formwork systems.

Alsina Formwork Engineering

BAUER Maschinen Group will once again present its complete portfolio of equipment for specialist foundation engineering in the open-air exhibition area of bauma 2016. In addition to Bauer’s core area of BG series rotary drilling rigs, the duty-cycle cranes of the MC series and diaphragm wall technology – with cutters and grabs, as well as the subsidiaries such as Klemm, Prakla, Hausherr, RTG, ABS Trenchless and MAT will also display their new developments.

Bauer celebrates a special anniversary – the first Bauer rotary drilling rig, the legendary BG 7, was first used on a construction site exactly 40 years ago. This first drilling rig was the prototype for all rotary drilling rigs that have now been built by different manufacturers worldwide for decades. At that time, the only available equipment for pile bores came from other construction areas and had to be temporarily converted for the new procedures.

BAUER Maschinen GmbH


During bauma 2016 BBA Pumps will display its recently launched dewatering units. The lineup consists of new 101 mm (4”), 203 mm (8”), 305 mm (12”) and 508 mm (20”) pump units. The main focus went to the reduction of the carbon footprint. All units are equipped with the cleanest highly regulated diesel engines to comply to the stringent European emission legislations.

BBA Pumps BV


During 2016, Brokk will celebrate 40 years of innovation as the world’s leading manufacturer of remoted-controlled demolition machines. The first Brokk machine that was introduced in Sweden back in 1976 meant a revolution in the demolition industry.

At bauma 2016, the company will introduce the Brokk 120 Diesel, the world’s smallest diesel-powered model. The basic design elements remain the same: a compact, flexible, productive and stable machine with an innovative 3-arm system for maximum reach and precision. With Brokk machines, work can be done in a safe and efficient way, allowing the operator to stay clear of risky situations.

Brokk AB


Comer Industries S.p.a. is strongly committed to offer green, safe and sustainable solutions featuring boosted efficiency and product integration.

The company‘s wide product range features efficient power transmission systems for stationary applications, such as concrete mixers and crushing equipment, and for off-highway vehicles that include complete drivelines: axles, hydrostatic transmissions and wheel drives.

Several OEMs have already planned to introduce Comer Industries’ solutions in their new Tier 4 final vehicles. Some of these will be on display at bauma 2016 including Atlas Weyhausen’s new AW1070 soil compactor and Thaler’s new 200 Series compact wheel loader.

Comer Industries S.p.a.

DOLL Fahrzeugbau GmbH is a trailer manufacturer which has established itself in its markets as a high-tech specialist for transport solutions. At bauma 2016, the company will be exhibiting trailers which have been optimised regarding payload and application area, price-performance ratio, as well as quality and reliability, safety and longevity.

Visitors will be able to see the panther low-loader: a 1+3-axle combination with the dolly firmly fixed with the gooseneck and the VARIO semi low-loader: a 4 axles unit with friction steered axle which is a robust, flexible vehicle for the construction sector.

DOLL Fahrzeugbau GmbH

Contractors who want to more fully exploit the potential of their machine, or their fleet, would find it well worth their while to drop in at the DYNAVIS® technology team’s exhibit at bauma. There, they will hear the testimonial of Nuova Ghizzoni S.p.A., an Italian pipeline contractor, that switched an entire fleet of hydraulic excavators to a fluid formulated with DYNAVIS® technology.

Machine manufacturers are also invited to get an idea of the potential of hydraulic fluids formulated with DYNAVIS® technology. Many construction-machine manufacturers have their own programs for lubricants, using their own brands.

An additional highlight at the stand is a pair of “Efficiency Bikes”, which are technically identical fitness bikes. Both drive hydraulic pumps comparable with those used in construction machines. One of the hydraulic systems contains a DYNAVIS® fluid and the other a conventional hydraulic fluid. A liquid column indicates how much more efficiently the DYNAVIS® fluid functions as the “cyclist” provides the pumping power.

Evonik Resource Efficiency GmbH

Visitors at the Hatz stands will see the world premiere of the water-cooled 3-cylinder engines of the current Hseries. Hatz Systems will introduce modern generator sets and hydraulic power packs.

The already existing water-cooled Hatz 4H50 will soon be joined by a 3-cylinder unit. With a capacity of 1.5 l and a maximum speed of 2800 rpm this engine sets standards.

The Hatz 3H50TIC, in particular, is designed for the U.S. market, Canada and some Asian countries. In order to comply with the EPA Tier 4 final exhaust emission standards and EU stage IIIB, a combination of external exhaust gas recirculation (EGR) and diesel oxidation catalyst (DOC) guarantees the necessary reduction of exhaust emissions. Both engine variants will extend the Hatz engine product range from 2018.

Motorenfabrik Hatz GmbH & Co. KG

bauma 2016 will see the international launch of a range of new products from JCB – including the innovative 3CX Compact backhoe loader and 4-wheel loaders with Command Plus cabs.

“2016 is an important year for JCB with the launch of some great new products. bauma will be the first international outing for the 3CX Compact which has just gone into production. Feedback on this machine is fantastic,” said Tim Burnhope, JCB chief innovation and growth officer. “We are also very excited about the launch of a range of new wheel loaders. The Command Plus cab has been met with rave reviews from users of our flagship 457 model and its introduction on other machines in the range gives us some great opportunities for growth.”

JCB Deutschland GmbH


Stanley Infrastructure is a division of Stanley Black and Decker. It consists of 4 divisions: Dubuis, HS Blades, Stanley Hydraulic Tools and LaBounty. Present at the exhibition will be HS Blades, Stanley Hydraulic Tools and LaBounty.

The company will show a modernized UP multi-system with faster interchangeable jaw sets for concrete cracking, concrete pulverizing, reinforced concrete processing, scrap metal shearing, and plate shearing. It will also present its hydraulic power packs working with breakers, chain saws or grinders. The long lasting experience of Horst Sprenger GmbH recycling tools and the strong marketing and distribution network of Stanley Infrastructure reflects in the new name HS Blades.

Stanley Infrastructure Solutions

At bauma, the Liebherr Group will showcase many new and further developed products from every area of its extensive range of construction machines, mobile and crawler cranes, material handling technology, mining, as well as components, on a total display area of more than 14,000 m2.

Liebherr will be presenting numerous global premières with the over 60 outdoor exhibits. These include a new 8-axle mobile crane, a 70 t crawler tractor, and a material handler for loads of up to 10 t with a 20 m range. A special innovation is the high-strength fiber rope for hoisting applications, and the large mining machines are represented with a newly developed 200 t excavator. The 240 t dump truck will once again serve as an additional magnet at the Liebherr stand in front of the pavilion.

Indoors, Liebherr presents the latest developments from the areas of mechanical, hydraulic and electric drive and control technology. This special stand for components also offers global premières – including the in-house developed energy storage system “Liduro” and the Liebherr SCRFilter as an exhaust gas treatment system for stage V diesel engines.

Liebherr-International Deutschland GmbH

The new Link-Belt HTT-86110, base rated at 100 t, will debut at bauma 2016. The HTT-86110 telescopic truck terrain crane features simple, all-wheel steer capability for optimum crane maneuverability in congested spaces. Steerable rear axles with super single tires are what make the HTT-86110 so agile and with 4 steering modes – independent front, independent rear, combination, and diagonal, this crane can move in and around jobsites with ease. The HTT-86110’s turning radius is less than 8.3 m from the centerline of the tire; this is comparable or better than similar 4-axle all-terrain cranes.

Link-Belt Construction Equipment Company

With 20 installations and a host of highlights, PALFINGER will present itself as an innovative market leader for mobile loader cranes and as a technological pacesetter for hydraulic lifting and work systems at bauma 2016. PALFINGER will demonstrate a wide product range, extending from the latest heavy-duty crane PK 165.002 TEC 7 and timber and recycling cranes right up to container handling systems, truck-mounted forklifts and access platforms.

There is a further market innovation in store in the form of the fall protection mode feature. PALFINGER is the first crane manufacturer to offer a personal protection mode for loader cranes and is thus an absolute pioneer when it comes to safety.

Palfinger Platforms GmbH

The new G&Z S400 compact slipform paver is designed to carry on the top performance of the G&Z brand, while adding even greater value for the customer. The S400 is an entry level, single/dual lane paver with the ability to perform versatile applications including: city streets, ramps, shoulders, highway, airport, dual lane, off-set, zero or minimum clearance and barrier walls.

Watch the video

“The S400 is a slipform paver that does not confuse ‘entry-size’ with ‘entry-quality’. Its functional design at an affordable price point opens the G&Z brand to a wider set of the market,” says Ron Meskis, president of G&Z. The S400 adds value to the customer in its versatility, low operating cost and productivity.

Guntert & Zimmerman Const. Div. Inc.

Three Finnish companies combine their forces to show a wide variety of attachments that can be used in recycling, demolition, forestry and many other applications. The largest display is offered by Ramtec, an established attachment manufacturer and is supported with bauma newcomers, Ecomeca and Marttiini Metal

Ramtec’s core product is the new Robi RP32R pulverizer, which is the 3rd model in the Robi pulverizer series designed for secondary stage demolition. It can be mounted on excavators between 22 t and 35 t. Other products on display include the MM104 Multi Master screening bucket, FH20R forest harvester, and DG15 sorting grapple.

Ecomeca has different models of crusher buckets available for excavators from 18 t to 50 t and models that can be installed on wheel loaders. At bauma the company will showcase its model Ecomeca 145, designed for 28 t to 40 t excavators.

Marttiini Metal is specialized in tiltrotators and other devices that can be mounted on excavators. At bauma the company will display 2 of its 4-model series: the mRoto-10 for 7.5 t to 10 t excavators and backhoes and the mRoto-20B for 14 t to 20 t machines.

Ramtec Oy, Ecomeca Oy, Marttiini Metal Oy

Axiomatic fosters the advance of connectivity in machines with the CAN/Ethernet converter AX140900.

The AX140900 is a bridge to the cloud. CAN networked devices on the machine can interface with an Ethernet networked device with internet connectivity via the Axiomatic converter. Alternatively, an Axiomatic CAN-Wifi or CAN-Bluetooth converter can link the machine control system to the cloud.

Typical applications include: off-highway vehicles, on-highway vehicles, oilfield services equipment, and agricultural equipment.

AXIOMATIC Technologies Corporation

Scania turns 125 this year and the company will be showing both the width and depth of its range at bauma 2016. Three divisions will be present, with products and services that share the common objective of providing the best possible total economy, regardless of application. Scania’s combination of robust products and connected services provides intelligent solutions that make all the difference.

Five trucks will be showcased, all weight-optimized thanks to Scania’s modular construction. Robust, reliable trucks, featuring connectivity and attractive services, help transport companies that choose Scania to increase their profitability.
Three industrial engine platforms – 9 l, 13 l and 16 l – for Tier 4 final and Stage IV.

Scania introduces a new era in meeting the mining industry’s transport needs, with smart and holistic solutions that lead to increased efficiency, by focusing on optimization at every stage.

“bauma is an outstanding showcase for Scania’s collected offering within rough and tough,” says Isabella Habijan, Scania’s bauma project leader. “We have 3 divisions on-site, and each is a leader in its field with special significance for the bauma target groups.”

Scania Deutschland GmbH

Linamar Corporation’s Skyjack division will unveil 2 new products at bauma. Skyjack will be launching the SJIII 4740 DC electric scissor lift and the SJ30 ARJE articulating boom with rotating jib, and display its existing range of simply reliable aerial work platforms and accessories.

“As a popular trade fair that draws an international crowd, bauma is an important show that Skyjack can’t afford to miss,” said Malcolm Early, vice president of marketing at Skyjack. “The rental and infrastructure industries, which have always been solid in central Europe, are key to Skyjack’s overall global development.”


American Augers has been handcrafting the latest in auger boring technology for over 40 years. Now, all American Augers boring machines are available in Tier 4 versions. The 60-1200 auger boring machine features a Volvo TAD571VE Tier 4 final engine. Other features of the newly released machine are an Eaton FS-5205A, 5-speed transmission and a total weight of 13,807 kg. The 60-1200 auger boring machine has a maximum thrust of 554 t and a 610 mm - 1,524 mm working range.

American Augers builds the largest category of horizontal directional drills in the industry and a full range of Auger Boring machines.

American Augers / Trencor

Webasto is continuing to make trucking in the unrelenting cold, not only manageable, but cost effective for drivers. Webasto Thermo & Comfort North America’s fuel-operated heaters cut idling, fuel costs and downtime while increasing profit.

Webasto’s Air Top 2000 ST interior bunk heater, can lead to significant cost savings and fast return on investment. The heater is designed to operate independently from the engine, using as little as one gallon of fuel in 22 hours. The Air Top 2000 ST can be easily installed in the under-bunk storage area of most sleeper cabs, and provides rapid interior heat without idling. Offering up to 7,000 BTU/h of heat output, Webasto’s air heater is CARB approved and EPA SmartWay verified.

Webasto Thermo & Comfort SE

Partagez sur Facebook / Share on Facebook    

© InfraStructures - Tous droits réservés - All rights reserved